If you have been a sub-ohm vaper for a while, you’re used to the fact that selecting the right coil for your device is just as important as finding the best-tasting e-liquid or the most powerful mod. When it comes to pod-based vaping, however, the variety of coil designs that you’re used to just doesn’t exist.
Because of the nature of salt nic e-liquid, pod systems are a little stricter than sub-ohm devices. In order for the liquid to properly vaporize, your coil’s resistance level must stay within a fairly small range. This means that you can’t really experiment with different coil builds like you can when you’re using a sub-ohm tank or an RDA.
In fact, pod cartridge coils and tank coils are dramatically different from each other in basically every way. As you’ll see, each have unique properties that promote two totally different vaping experiences.
While vape tank coils tend to have resistance levels below one ohm, pod cartridge coils are often 1.2ohms or higher. This is because of the fact that salt nic e-juice must be used with a mouth-to-lung (MTL) device. A higher resistance level and a lower wattage level help preserve the integrity of the salt-based nicotine, allowing the juice to be turned into smooth, satisfying vapor.
If you’ve recently gotten a pod system, you may have struggled to locate the coil. Pod cartridge coils are extremely small. That’s because they don’t require a huge amount of e-liquid in order to create vapor. Sub-ohm coils, on the other hand, need to have enormous wicks in order to absorb a lot of juice at once.
If you’ve been using sub-ohm coils with a conventional mod, you know that organic Japanese cotton is a must if you want to experience smooth, clean flavor and massive clouds. Surprisingly to many, pod cartridge coils typically don’t contain a cotton wick. That’s because cotton is so absorbent that it can cause the pod cartridge to flood. Pod mods are low-wattage devices that don’t require that their coils stay extremely saturated with e-juice. Therefore, they tend to have wicks that are made from synthetic fibers. This material absorbs just enough liquid to turn each hit into a satisfying experience.
Many people who prefer sub-ohm devices are cloud chasers who crave abundant, thick vapor and high wattage levels. Pod systems are designed for vapers who want to experience a good throat hit and a nice nicotine buzz.
Sub-ohm coils are made to accommodate the needs of those who want to chase clouds. They’re specially designed to absorb a massive amount of e-liquid so that each hit produces a ton of vapor. Pod cartridge coils take in a small amount of liquid since the vaper wants a nice hit to the throat more than anything else.
Because sub-ohm coils are heated to such high temperatures, they tend to die out pretty quickly. The average heavy vaper will go through one sub-ohm coil every two weeks. Because pod cartridge coils are exposed to lower wattage levels, they tend to last for long periods of time. Many vapers can go a month or so before it’s time to invest in a new cartridge.
The Differences Are There
As you can see, pod cartridge coils and sub-ohm coils are extremely different in every way. If you’re new to pod-based vaping, it is crucial that you understand how pod cartridge coils differ from the coils that you’re used to.
For vapers going through those bottles of e-juice at a ridiculously fast rate, it's time to reconsider your vaping habits. How frequently you have to restock your juice supply depends on so much more than how often you vape. This guide will help you make that vape juice last for a long time, saving you a good amount of money in the long run.
Tip #1: Lower Your Wattage Level
Many people who are new to vaping don't quite grasp the relationship between wattage and e-liquid supply. As it turns out, the wattage that your device is set at directly affects how quickly you go through vape juice. The higher the wattage, the more your e-liquid will evaporate.
People who enjoy blowing huge clouds enjoy high wattage levels because of how much liquid is evaporated per puff. However, if you're trying to make your juice last for a long time, lowering that wattage level would be a good idea.
Tip #2: Select a Vape Juice with More Propylene Glycol (PG)
Juices that have a high amount of vegetable glycerin (VG) don't last as long as those that have more propylene glycol (PG). That's because VG is a thicker substance that evaporates at a different rate from PG.
Always look at a bottle of liquid to see the VG/PG ratio. This will help you choose an e-juice that won't burn as quickly.
Tip #3: Choose a Higher Nicotine Concentration
Some vapers go through a tremendous amount of e-liquid weekly because they're simply addicted to nicotine. Many beginners make the error of choosing a low-nicotine juice after coming off of tobacco cigarettes. The problem is that those who crave a lot will end up vaping excessively to get the proper amount of nicotine in their system.
If you're physically addicted to nicotine, opt for a high-nic e-juice. You'll likely find that you hit your mod less frequently.
Tip #4: Stay on Top of Your Coils
Always change your coils when they begin to lose their functionality. Coils that are past their prime will negatively impact the e-liquid that's in your tank, causing it to burn and develop a poor flavor. A dead coil can also cause your tank to leak.
As soon as the flavor of your juice tastes burnt or weak, it's time to change your coil. Always opt for high-quality coils that are made with materials that last for a long time.
Tip #5: Don't Leave Your Tank in Hot, Bright Areas
E-Liquid going to evaporate. In fact, the act of steeping involves letting it evaporate just enough to create a stronger, richer flavor. However, it’s possible to accidentally let your juice evaporate too much.
Leaving your vape tank in a hot or sunny area will inevitably result in more evaporation. It's wise to store your tank and liquid in a dark, cool place when not in use.
Final Tip: Maintain Your Tank
Another reason for wasted e-juice is a poorly maintained tank. If your tank is extremely old or improperly cared for, it can end up leaking trace amounts of juice throughout the day. Always check your tank for signs of damage.
Save Some Cash and Keep a Longer-Lasting Vape Stash
By following this guide, you can say goodbye to wasting money on e-liquid each month. These tips will help you make the most of your juice supply.
accommodating APVs awareness awesome ejuices Bavarian Hazelnut Cream benefits Blackberry blackberry limoncello break-in brews builds Cappuccino Diablo Caramel Cake Cigar cigarettes cigarettes to vaping clouds coffee coils courteous Dark Roast devices differences diy e cig juice e juice best e juice e-juice e-juices e-liquid e-liquids educate ejuice electronic cigarettes eliquid Exotic Blend flavor flavors good websites Highbrow Vapor Highbrow Vapor humid conditions humidly kicking the habit mods nicotine nicotine strengths ohms patience persona power power vaping question rda rta RY4 smoke smokers taste tc technology temperature control tips Tiramisu tobacco vape vape juice vape juices vape pens vape sessions vaper vaper tongue vapers vapes vaping vaping blogs vaping foums vapor vapor production vapor's tongue variable vibration watts Welcome to Highbrow Vapor wicking
Now that you've ditched the analog cigarettes for vape products, you have much to feel proud about. However, it's still important to be a responsible vaper. When it comes to hardware, recycling is crucial. Most of the materials from which these types of products are made from can be recycled so that they may be reused.
You may think that your products don't make a huge difference when it comes to saving the environment. However, consider how many coils and juice bottles you go through in one month alone. Over time, your discarded products add up. That's why it's important to recycle your vape products when you're no longer using them.
Recycling Your Vape Products:
Your empty e-liquid bottles are made from either plastic or glass, two materials that should always be recycled. To properly recycle your old juice bottles, make sure to rinse them out with hot water. Don't forget to recycle the bottle caps as well.
An alternative to recycling your old juice bottles is repurposing them for yourself. These bottles can be collected and used for future DIY juice-making ventures. Even if you don't plan on becoming a DIY vaper in the near future, small, empty bottles do come in handy.
It's crucial that you recycle your old batteries. In fact, many states require by law that all batteries are properly recycled. Because they can leak toxic chemicals if carelessly discarded, it's very unwise to simply toss them into the garbage.
If your vape batteries are still functional, you may consider selling them instead of discarding them. Many online vaping communities allow you to sell your old batteries if they still work properly.
Sure, coils are small, but they really do add up. Because coils are made from stainless-steel, they're recyclable. Give them a good rinse and toss them into the recycling bin rather than the garbage can.
Your tanks can be recycled because they are made from stainless-steel and glass/poly-carbonate. Both materials can be turned into other products. Give your old vape tank a thorough rinse under warm water and throw it into your recycling can.
Just Recycle It
By making a point to recycle these vape products, you will become a responsible vaper who is doing their part to take care of the environment.
accommodating APVs awareness awesome ejuices Bavarian Hazelnut Cream benefits Blackberry blackberry limoncello break-in brews builds Cigar cigarettes cigarettes to vaping clouds coffee coils courteous Dark Roast devices differences diy e cig juice e juice best e juice e-juice e-juices e-liquid e-liquids educate ejuice electronic cigarettes eliquid Exotic Blend flavor flavors good websites Highbrow Vapor Highbrow Vapor humid conditions humidly kicking the habit mods nicotine nicotine strengths ohms patience persona power power vaping question rda rta RY4 smoke smokers taste tc technology temperature control tips Tiramisu tobacco vape vape juice vape juices vape pens vape sessions vaper vapers vapes vaping vaping blogs vaping foums vapor vapor production vapor's tongue variable vibration watts Welcome to Highbrow Vapor wicking
When it is time to get a new coil, all vapers know the feeling of having to break in a new coil. It is a rewarding feeling and maybe it is just a little bit time consuming, but in the end, it is worth it. There are at least three main ways to break in your new coil, and we will help walk you through all three.
Methods to Break-in Your Coil #1: No Power Vaping
The most common method is known as “No Power Vaping” or as “The Suction Method”. This method works by forcing liquid into the coil via a human-created vacuum. Simply close the air inflow and pull as if you are vaping, and the air will leave the chamber. Since wicks work by pulling liquid up, the vacuum speeds up that process quite a bit.
By using this method, you can break in your coil far more quickly than the other methods mentioned below. However, it is extremely easy to accidentally flood your coil, since you are suctioning without much knowledge of where the e-liquid is. It is essential to do the suctioning in small increments, or you will have to start over after you have flooded the coil.
Methods to Break-in Your Coil #2: Vibration
We know what you are thinking - that title sounds strange. But many vapers find this method quite therapeutic! Once you have set up your coil, grab your device. Then, imagine that you are holding a soda that you want to shake up and give to someone as a prank. Shake it as much as you can, and you will see that the coil is completely primed in an extremely fast amount of time. This works similarly to the No Power method, since shaking it is forcing the juice up the wick at a quicker rate. The reason it is being forced up is different, however. By shaking it, the liquid becomes more oxygenated. The oxygen bubbles act as a force to push the liquid up alongside the bubbles.
Methods to Break-in Your Coil #3: Patience
Of course, nobody wants to sit and wait for their coils to warm up. However, if you have the patience to wait for your coil to warm up on its own, then this is the best method. Those who do wait swear that the pulls after waiting are the best they have had. This method still only takes between 10 and 20 minutes, so it isn’t that long to wait if you have prepared everything else in advance.
The three methods we have mentioned above are the most common methods vapers use to quickly and efficiently break in a new coil. There are many other ways that you may hear more seasoned vapers use, but by sticking to one of these three, you will be sure to have your new coil primed and ready to use, as soon as you’ve finished working with it.
Tags: coils, break-in, power vaping, vibration, patience, methods, vaping, tips
Before wicking your coil, the most important thing to consider is safety. Moreover, you should also know that all devices on the same principle. For them to generate heat, electricity runs from the batteries to the atomizer where it controls the coils. Therefore, the e-liquid is vaporized in the wicking material to produce clouds from the infused nicotine that we love puffing. To this end, this is what vaping is all about. Whether you are vaping on handmade alternatives or pre-built coil heads, the process is similar.
For any pre-built atomizer head, there are one or two perpendicular or parallel coils which are surrounded by an organic cotton layer. The wicking material (the cotton) is in contact with the drilled feeding holes on the exterior head shells. For this reason, the e-juice will slowly reach the resistances each time you fill your tank. The pre-built coils are designed to offer a great amount of vapor and good flavor. However, they should be tossed after two weeks because they can’t last forever. While it depends on your vaping style, the manufacturing technique also has an impact on their lifespan. Moreover, there are ways in which you can re-build these capsule coils through invention.
Therefore, the DIY alternative wicking and coiling can save you more money. However, you need the proper tools, knowledge, and device to make personalized builds. For you to use the user-made coils, there are two types of devices that work best. The RTAs (Rebuildable Tank Atomizers) and the RDAs (Rebuildable Dripping Atomizers) that come with RBA bases.
Acquaint yourself with the wires used in vaping. Kanthal is the most common wire. It’s the best alternative to Nichrome which is easier to find. For you to control the mod temperature, wires like Nickel, Titanium, and Stainless-Steel can be used. In the case where you have RBA-based tanks, you can make a quad coil configuration on some models.
Any RTA or RBA bases have tubes that wind around posts together with small curved channels through which the e-liquid flows to the coil. It takes more practice, in this case, to cut the cut the wicking material to the exact channel size. For you to get it right, you should mark the wick and cut the right size. Saturate the de cotton with some with some e-liquid carefully and place it right above the channel. It's now time to test your skills. Assemble the tank and start vaping
When you start vaping, tiny bubbles must appear forming at the base reservoir. If this is the case, be sure that your wicking process is fruitful and safe. If you begin feeling constant burn taste, then you must re-do the wicking process afresh. For this time, you should try using less cotton so that you don’t cover the feeding-juice channels. The tips above cover the basics of safe wicking.
Tags: wicking, coils, e-liquids, e-juices, vape juices, vapes, RDAs, RTAs, DIY, builds, vaping